ONU/ONT
Application
-
- Typical Solution: FTTH(Fiber To The Home)
- Typical Business: INTERNET, IPTV, WIFI etc
Description
1. Overview
- XP8421-B is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access.
- XP8421-B is based on mature and stable, cost-effective GPON technology. It could switch automatically into GPON mode when access to the GPON
- XP8421-B adopts high reliability, easy management, configuration flexibility, and good quality of service guarantees to meet the technical performance of GPON Standard of ITU-TG.984.X and IEEE802.3ah.
2. Functional Feature
-
- Support GPON mode and EPON mode.
- Support Route mode for PPPoE/DHCP/Static IP and Bridge mode
- Support IPv4 and IPv6 Dual mode
- Support 2.4G
- Support LAN IP and DHCP Server configuration
- Support Port Mapping and Loop-Detect
- Support Firewall function and ACL function
- Support IGMP Snooping/Proxy multicast feature
- Support TR069 remote configuration and maintenance
- Specialized design for system breakdown prevention to maintain stable system
4. Hardware Specification
-
Technical item Details PON Interface
1 GPON BoB (Class B+） Receiving sensitivity:≤-27dBm Transmitting optical power: +0.5~+5dBm Transmission distance: 20KM Wavelength TX: 1310nm, RX: 1490nm Optical Interface SC/UPC Connector Design Scheme ECONET7526 Chip Spec CPU 950MHz,DDR2 256MB Flash SPI NAND Flash 128MB LAN Interface 1 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
Wireless
Compliant with IEEE802.11b/g/n, ac 2.4G Operating frequency:2.400-2.4835GHz 5.8G Operating frequency:5.150-5.825GHz 2.4G 2*2 MIMO, rate up to 300Mbps 5.8G 2*2 MIMO ,rate up to 867Mbps 2 external antennas 5dBi Support Multiple SSID POTS interface
1 FXS, RJ11connector Support: G.711/G.723/G.726/G.729codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according toGR-909
LED 12 LED, For Status of PWR、LOS、PON、LAN1~LAN4、2.4G、5.8G、TEL、wps、internet Push-Button 2 ,For Function of Reset and WPS Operating Condition Temperature: 0℃~+50℃ Humidity: 10%～90%（non-condensing） Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%（non-condensing） Power Supply DC 12V/1.5A Power Consumption ≤8W Dimension 208mm×133mm×42mm（L×W×H） Net Weight 0.35Kg Storing Condition Temperature: -30℃~+60℃ - 5. Panel lights Instruction
| Pilot Lamp | Status | Description |
|
PWR |
On | The device is powered up. |
| Off | The device is powered down. | |
|
LOS |
Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
|
PON |
On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
|
LAN1~LAN4 |
On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. | |
|
TEL |
On | Phone has registered to the SIP Server. |
| Blink | Phone has registered and data transmission(ACT). | |
| Off | Phone registration is incorrect. | |
|
2.4G |
On | 2.4G WIFI interface up |
| Blink | 2.4G WIFI is sending or/and receiving data (ACT). | |
| Off | 2.4G WIFI interface down |
Reviews
There are no reviews yet.